Release 6.0 411
User Guide Appendix H How to Set/Check Application Server (VMware) (iSCSI)
6. On the Service Console: Connection Settings screen of the Add Network Wizard, enter a
Network label to identify the port group that was created under Port Group Properties.
Select either Automatically retrieve IP settings or Use the following IP setting.
If you selected Use the following IP setting, enter the IP address and subnet mask, then click the
Edit button.
Figure H-11: Add Network Wizard Screen (5)
7. Enter the IP address of the default gateway for service control. When settings are completed, click
the Next button.
8. In the Settings Completed screen of the Add Network Wizard, use the Preview function to check
that vSwitch has been correctly configured, and then click the Finish button.
Figure H-12: Add Network Wizard Screen (6)
To Next Page
Loading...
