Release 6.0 16
User Guide About This Document
Document Organization
Table 3 shows the documentation organization.
Dummy carrier Refers to a dedicated dummy carrier, which is used when a disk
drive is not installed.
Host bus adapter (HBA) Refers to a Fibre Channel (FC) controller.
Network Interface Card (NIC) Refers to an interface control device connected to a client's LAN
port or an application server's Ethernet port.
Controller (CONT) Refers to a controller in a DAC.
Power Supply (PS) Refers to a power supply unit.
FC cable Refers to a Fibre Channel cable.
FC switch Refers to a Fibre Channel switch.
Physical Disk (PD) Refers to a physical disk.
Table 2: Terms Used (Contd.)
Term Description
Table 3: Document Organization
Chapter/ Appendix Description
Chapter 1: "Overview" This chapter describes features, components, and the basic
operation of this disk array system.
Chapter 2: “Workflow -
Installation to Operation”
This chapter explains the flow from the installation to operation of
this disk array system.
Chapter 3: “Installing the Disk
Array System”
This chapter explains how to install and connect this disk array
system.
Chapter 4: “NEC Storage
Manager”
This chapter explains NEC Storage Manager used for managing
this disk array system.
Chapter 5: “Initializing a Disk
Array (FC)”
This chapter explains the initialization of this disk array system in
an FC environment.
Chapter 6: “Initializing a Disk
Array (iSCSI)”
This chapter explains the initialization of this disk array system in
an iSCSI environment.
Chapter 8: “Installing Optional
Parts”
This chapter describes the preparation and installation of the
optional parts of a disk array unit.
Chapter 9: “Changes to the
Configuration”
This chapter explains how to modify the configuration and the
settings of this disk array system.
Chapter 10: “Troubleshooting” This chapter describes possible problems and how to solve
them.
Appendix A: "Specifications" This appendix provides the specifications of the disk array.
Appendix B: “How to
Set/Check Application Server
(Windows) (FC/SAS)”
This appendix provides the steps you should follow while setting
or checking an application server in the Windows environment,
when this disk array is configured for the FC connection.
To Next Page
Loading...
