Release 6.0 346
User Guide Appendix C How to Set/Check Application Server (Windows) (iSCSI)
3. Check that the iqn status of the target disk array unit is shown as Connected (transition from
inactive).
When adding registration of host port (iSCSI port) for the disk array (redundant configuration).
Click the Log On button.
When not adding registration of host port (iSCSI port) for the disk array (non-redundant
configuration)
Click the OK button. This completes the operations.
Figure C-28: iSCSI Initiator Properties (Targets Tab) Screen
To Next Page
Loading...
