NEC Storage M100 Series - Figure C-25: Log on to Target Screen

Release 6.0 342
User Guide Appendix C How to Set/Check Application Server (Windows) (iSCSI)
Figure C-25: Log On to Target Screen
3. Change the following settings. When finished, click the OK button.
Connection settings
 Select the Microsoft iSCSI Initiator option from the Local Adapter drop-down menu.
 Select the IP address of the local server from the Source IP drop-down menu.
 Select the IP address of the disk array host port (iSCSI port) from the Target Portal drop-down
menu.
CHAP Authentication Settings
 Select the CHAP logon information option.
 Enter password to be assigned to target in the Target Secret box.
 Select Execute mutual CHAP option when using mutual CHAP authentication.