Release 6.0 422
User Guide Appendix H How to Set/Check Application Server (VMware) (iSCSI)
7. Adjust the file system values and area to be used for data store. The default settings is to set the
storage device for all empty areas. After completing the settings, click Next.
Figure H-25: Add Storage Wizard Screen (3)
8. When the Completed Settings screen appears, check the data store configuration. If there are no
problems with the settings, click the Finish button.
9. Click the Change button.
Until now, a data store has been created in an iSCSI storage device that can be
accessed by Software Initiator.
To Next Page
Loading...
