NEC Storage M100 Series - Figure C-1: Unit with Nf53 X1-Xfxx (10 Gbps Iscsi 2 Port Controllers); Figure C-2: Unit with Nf53 X1-Xfxx (1 Gbps Iscsi 2 Port Controllers)

Release 6.0 321
User Guide Appendix C How to Set/Check Application Server (Windows) (iSCSI)
For a sample connection configuration, see Appendix L: "iSCSI Connection
Configuration-Examples".
The following shows the positions of the host ports.
Figure C-1: Unit with NF53x1-xFxx (10Gbps iSCSI 2port Controllers)
Figure C-2: Unit with NF53x1-xFxx (1Gbps iSCSI 2port Controllers)
The following shows an example of a 10-Gbps iSCSI connection (redundant path configuration in
combination with PathManager).
To implement the following recommended example, two NICs must be installed in the application
server and two 10-Gbps cables are needed to connect the disk array unit and NICs.
Use a 10-Gbps cable to connect the NIC to the host port (HP connector) of the disk array unit. (The
10-Gbps cable has the same connector shape on both ends.)