NEC Storage M100 Series - Figure 7-11: Finish Initialization Wizard

Release 6.0 221
User Guide Chapter 7 Initializing a Disk Array (SAS)
7.3.1.8 Finish Initialization Wizard
Confirm that the initialization is finished.
Figure 7-11: Finish Initialization Wizard
To move on to pool binding, click Bind pool.
Parameter Description
Bind pool When you click this hyperlink, the Pool Bind page appears for
starting pool binding.
When the initialization is complete, the Access Control function starts
automatically, and then all the SAS ports change to the port mode for SAS
model.