NEC Storage M100 Series - Figure 7-10: Edit Dialog

Release 6.0 220
User Guide Chapter 7 Initializing a Disk Array (SAS)
Edit dialog
Figure 7-10: Edit Dialog
Clicking OK applies the change of settings to the list.
When you click Next after changing the port settings as needed, the port settings are made.
Parameter Description
Port list Select the port you want to set.
Edit button A dialog box is displayed that lets you edit the settings of the selected port.
Parameter Description
Port number Unique port number
Port name Specify the name to be assigned to the port.
Platform Specify the platform of the host to be connected.
Data rate Specify the value corresponding to the data transfer rate of the HBA or
HUB.