NEC Storage M100 Series - Disk Enclosures; Figure 8-7: SAS Cable Connection; Figure 8-8: Cables and Connectors

Release 6.0 255
User Guide Chapter 8 Installing Optional Parts
8.3.4 Disk Enclosures
For installing and removing disk enclosures, see the sections below.
Mounting Disk Enclosures on Rack
Mounting disk enclosures on a rack follows the same procedure as mounting the disk array unit on a
rack. For details, see Section 3.2.1: “Mounting a Disk Array Unit on a Rack”.
Connecting Disk Enclosures
When connecting a disk enclosure, use a SAS cable to connect DP0 on the disk array unit with the
DP0-IN on the disk enclosure. If connecting multiple disk enclosures, use a SAS cable to connect
DP0-OUT on a disk enclosure with DP0-IN on the next disk enclosure.
Figure 8-7: SAS Cable Connection
Figure 8-8: Cables and Connectors
Do not connect to the DP1-IN (on the left of DP0-IN).