NEC Storage M100 Series - Figure 7-5: Setting Disk Array Subsystem Name

Release 6.0 214
User Guide Chapter 7 Initializing a Disk Array (SAS)
7.3.1.4 Set Disk Array Subsystem Name
You can change the disk array name.
Figure 7-5: Setting Disk Array Subsystem Name
Perform the following steps to change a disk array name:
Parameter Description
Product ID Displays the product ID of the disk array.
Serial Number Displays the serial number of the disk array.
Disk Array Subsystem Name Displays a name to identify the disk array subsystem.
New Disk Array Subsystem
Name
By default, displays the current disk array subsystem name.
To change this name, enter a new disk array subsystem name.