NEC Storage M100 Series - Registering Host Information by Using File Output; Figure E-1: Getting Started - Host Information

Release 6.0 377
User Guide Appendix E How to Set/Check Application Server (Linux) (FC/SAS)
E.2.2 Registering Host Information by Using File Output
To register host information by using file output, follow the procedure below.
1. Report a host information file.
See Section E.2.1: “Collecting Host Information by Using File Output” to report a host information
file.
2. Transfer the host information file.
Use file transfer, USB memory or other methods to transfer the host information file to a client.
3. Register the host information by using NEC Storage Manager.
On the left pane on the NEC Storage Manager window, click Configuration> Host > Host
Information Collection to open the host information registration window.
Figure E-1: Getting Started - Host Information