NEC Storage M100 Series - Logon Steps in Windows Environments; Figure D-15: Iscsi Initiator Properties - Targets Tab

Release 6.0 370
User Guide Appendix D How to Set/Check Application Server (Windows) (iSCSI HW Initiator)
D.2.2 Logon Steps in Windows Environments
1. Click the Refresh under the Targets tab in iSCSI Initiator Properties. Then, the Initiator name
(iqn) of the disk array unit will be shown under Discovered targets. Select an iqn and click the
Connect button.
Figure D-15: iSCSI Initiator Properties - Targets Tab