NEC Storage M100 Series - Figure H-24: Add Storage Wizard Screen (2)

Release 6.0 421
User Guide Appendix H How to Set/Check Application Server (VMware) (iSCSI)
4. Select the iSCSI device to be used for the data store, and then click the Next button.
Figure H-24: Add Storage Wizard Screen (2)
5. Current disk layout is displayed. Check the current disk array layout. If there are no problems with
the settings, click the Next button.
6. The Disk/LUN Properties are now shown. Enter the data store name.
After completing the settings, click the Next button.
The data store name is shown in the VI Client. The label must be unique within the
current instance of the virtual Infrastructure.