Release 6.0 181
User Guide Chapter 6 Initializing a Disk Array (iSCSI)
When editing the settings of host connection ports is completed, click Next on the Host connection port
parameters (iSCSI) page.
Figure 6-8: Host Connection Port Parameters (iSCSI) - Setting
Parameter Description
Port number Displays unique number for the port.
Port name Specify a port name.
Link Speed & Duplex Displays the value of the link speed duplex. These values
cannot be changed.
MTU Select a MTU (Maximum Transmission Unit) size from the
drop-down list. Change the size according to the network
environment in use. The default value is 1500.
To Next Page
Loading...
