Release 6.0 122
User Guide Chapter 4 NEC Storage Manager
4.5 Starting NEC Storage Manager Client
This section describes how to start up NEC Storage Manager Client.
4.5.1 Before Starting NEC Storage Manager Client
Before you use NEC Storage Manager Client (Web GUI) in a Windows environment, configure the
Web browser (Internet Explorer) and Java. For details see Section 4.2: “Before Starting NEC Storage
Manager Client”.
4.5.2 Starting NEC Storage Manager Client
Start the Web browser. (In a Windows Vista or later or Windows Server 2008 or later environment,
right-click the icon to start the Web browser to select Run as administrator.)
Start up the NEC Storage Manager Client by entering the host name or the IP address (floating
address, or if no floating address is assigned, the IP address of Controller 0 or Controller 1) of the disk
array to be connected in the address bar of the Web browser.
For example:
http://host name (or http://IP address)
If you enter the IP address in the IPv6 format, the IP address must be enclosed in square
brackets [ ], in which case, you cannot use Internet Explorer 6.
To Next Page
Loading...
