NEC Storage M100 Series - Logon Steps in Windows Environments; Figure C-24: Iscsi Initiator Properties (Targets Tab) Screen

Release 6.0 341
User Guide Appendix C How to Set/Check Application Server (Windows) (iSCSI)
C.3.1 Logon Steps in Windows Environments
Perform the following steps to logon to the target in the windows environment:
1. Click the Refresh under the Targets tab in iSCSI Initiator Properties. Then, the Initiator name
(iqn) of the disk array unit will be shown under Targets. Select an iqn and click the Log on button.
Figure C-24: iSCSI Initiator Properties (Targets Tab) Screen
2. Change the following settings. When finished, click the Advanced button.
 Select the Automatically restore this connection when the system boots option.
 Do not select the Enable muti-path option.