NEC Storage M100 Series - Figure 7-22: Host Information Collection - Registration

Release 6.0 237
User Guide Chapter 7 Initializing a Disk Array (SAS)
7.3.5.2 Host Information Collection- Registration
Figure 7-22: Host Information Collection - Registration
Specify a host name, platform, and path, and then click the Set button to register a new host.
Parameter Description
Host Name Specify a host name.
Platform Specify the platform.
Path List view This list view lets you check the specified port information.
Add Port button Set the port(s) for the host you are adding.
Change button By selecting the added port from the path list view, and
then clicking the Change button, the port change screen
appears. You can change the selected port information on
this screen.
Delete button By selecting the added port from the path list view, and
then clicking the Delete button, you can delete the selected
port from the host.