NEC Storage M100 Series - Figure 5-6: Set Time

Release 6.0 134
User Guide Chapter 5 Initializing a Disk Array (FC)
1. Enter a new name in the New Disk Array Subsystem Name box.
2. Confirm the name and click Next.
5.3.1.5 Set Time
Figure 5-6: Set Time
Parameter Description
State Displays the date and time currently set for the disk array
and the status of synchronization with the NTP server
appear.
Synchronize the time with the NTP
server.
Select this option to move on to the NTP setting page.