Release 6.0 337
User Guide Appendix C How to Set/Check Application Server (Windows) (iSCSI)
C.2 iSCSI Setup Tool
Run the iSCSI Setup Tool on application servers to configure the iSCSI settings required for the
application server. Before starting this section, you need to install NEC Storage Manager Agent Utility.
For details on how to install, see Section B.1: Installing NEC Storage Manager Agent Utility.
1. Starting iSCSI Setup Tool
Click Start > NEC Storage Manager Agent Utility > iSCSI Setup Tool to start iSCSI Setup Tool.
2. Selecting the target disk array unit
Select the serial number of the target disk array unit from the Serial number(S) box.
After selecting or entering the serial number, click OK.
3. When collecting the disk array unit information is successfully completed, the serial number,
controllers, IP addresses of the disk array unit and their connection statuses are displayed.
To Next Page
Loading...
