Release 6.0 139
User Guide Chapter 5 Initializing a Disk Array (FC)
Edit dialog
Figure 5-10: Edit Dialog
Parameter Description
Port list Select the port you want to set.
Edit button A dialog box is displayed that lets you edit the settings of the selected port.
Parameter Description
Port number Unique port number
Port name Specify the name to be assigned to the port.
Platform Specify the platform of the host to be connected.
Data rate Specify the value corresponding to the data transfer rate of the HBA or
HUB.
Server connection type Specify the connection topology between the disk array and the host.
Automatic negotiation:
The connection type is automatically negotiated.
FC-AL:
Select this when connecting the host connection port and the application
server directly over an FC cable or when using a loop topology FC switch.
FC switch connection (Fabric):
Select this when using an FC switch other than a loop topology FC switch.
To Next Page
Loading...
