NEC Storage M100 Series - Table 1-8: Host Port Status

Release 6.0 50
User Guide Chapter 1 Overview
Lit Not lit
- - Starting up or rebooting.
Lit
Lit 1
second
Not lit 1
second
- - Waiting for the disk enclosure behind the given
enclosure to be powered on.
Lit Lit - - Failure has occurred.
Flashing
fast
Lit - -
Failure has occurred (log collectable).
Lit 1
second
Not lit 1
second
Lit - -
Retrying as disk enclosure shortage has been
detected.
Disk Port blocked.
Lit 1
second
Not lit 1
second
Flashing
fast
- - Updating firmware online.
- - Lit - The device is selected.
- - - Lit Detected BBU failure.
- - - Flashing Warning for the end of the BBU life cycle
Table 1-7: Status Display LED
(5) Ready
LED
(6) Fault
LED
(7) ID
LED
(8) BBU
LED
StatusGreen Orange Blue Orange
Table 1-8: Host Port Status
Host port Status
(9) Link LED (L) (green) Lit = linkup
Not lit = link down
(10) Active LED (A) (green) Lit or flashing = I/O access
Link/Active flashing together Flashing in a cycle of 2 seconds = Off line
Flashing in a cycle of 1 second = Powering off
Other than above = Invalid port settings