Release 6.0 200
User Guide Chapter 6 Initializing a Disk Array (iSCSI)
Perform the following steps for binding a logical disk:
1. The settings of the logical disk to be bound are listed. Confirm the settings.
2. To perform advanced settings, click Advanced.
3. After confirming the settings, click Set to display the confirmation message.
4. Click Yes to perform the logical disk binding.
Logical Disk Advanced Settings Displays default advanced settings to be used for binding a
logical disk.
Advanced Click Advanced to modify the default settings displayed
under Logical Disk Advanced Settings.
Logical disks to be bound Displays the details of the logical disks to be bound.
Parameter Description
To Next Page
Loading...
