Release 6.0 232
User Guide Chapter 7 Initializing a Disk Array (SAS)
Select a pool in which logical disks will be bound, enter the number and capacity of logical disks, and
click Next.
Number of logical disks Specify the number of logical disks to be bound in the
spinner.
Logical disk capacity Specify the capacity of logical disks to be bound in the
spinner.
Logical disk capacity Indicates the space size consumed by logical disks.
Capacity logical disks consume Indicates total size of the space occupied by logical disks.
Unused capacity of the pool Indicates free space available in a pool.
Logical disk name Displays the automatically assigned logical disk name. To
change the logical disk name, enter a new logical disk
name. If two or more logical disks are bound, enter a prefix
for them.
Parameter Description
To Next Page
Loading...
