NEC Storage M100 Series - Page 291

Release 6.0 291
User Guide Chapter 10 Troubleshooting
b. Other errors
iSM31024 Restriction on the logical disk number (LDN) specified in the
system area.
iSM31025 The maximum number of options have been exceeded.
iSM31026 Duplicated option.
iSM31027 An invalid related option has been specified.
iSM31028 Invalid option name.
iSM31029 Configuration settings are not started.
iSM31031 Unlocking licenses are not done.
iSM31044 The disk array does not support creation of LD set.
iSM31056 Upper limit of LD set creation.
iSM31057 The specified LD set name is invalid.
iSM31058 The specified LD set is not found.
iSM31059 The specified LD set exists.
iSM31060 The specified platform is not supported.
iSM31061 Operation on invalid partition.
iSM31098 Partition status has been updated.
iSM31108 The specified LD set is locked.
iSM31147 The specified platform is not supported.
iSM31150 The specified initiator set is set to another LD set.
iSM31151 The specified LD set is being used.
iSM31152 Upper limit of initiator addition.
iSM31174 Exception occurred during transmission.
iSM31175 Timeout occurred with connection to NEC Storage Manager.
iSM31208 Specified LD set is designated for FC.
iSM31212 The platform of LD set does not match that of initiator.
Error Codes Cause
Error Codes Cause
- An error occurred in Iscsicli or iscsiadm command.
(Refer to the log file for the detail on the error.
Time Out Timeout occurred while running a command.
Service Error An error occurred during service startup.
(Refer to the log file for the detail on the error.)
SSH Error Error occurred during the process of SSH.
(Refer to the log file for the detail on the error.)