: Default
BASIC SERVICE SETTING DATA
1200 Send ANI signal to PSTN on DOD MFC call
[8300R3.5]
0
1
To send
Not sent
NOTE: For Brazil, set this command to “0”.
1201 Sender Tone sending on DOD MFC call
[8300R3.5]
0
1
Not sent
To send
1202 Selection of reference to Caller ID when an incoming call is
received to SIP trunk and “anonymous” is set to From header
Displayname field or Username field
[8300R4]
0
1
As per CMBA Y=126
Caller ID is not informed
1203 Selection of ringing cadence when calling from trunk to CCIS
tandem office
[8300R5]
0
1
As per CM35 Y=000
As per CM35 Y=033
NOTE: Set CM08>138 to “0” and CM08>1203 to “0” for CCIS tandem office when the ringing signal from
trunk and via CCIS tandem office are the same.
1205 Selection of trunk route seized for Mobility Access
[8300R3]
0
1
By calling party’s tenant/terminating
trunk’s tenant
By Mobility Access station’s tenant
1209 Ringing cadence on incoming CCIS call by CM35 Y=033 and
034
[8300R6]
0
1
To provide
Not provided
1210 Access Code to be added to the calling party number when
incoming call from C.O. (This assignment is required to call
back from the analog telephone for Caller ID-Station)
[8300R6]
0
1
To provide
Not provided
Continued on next page
To Next Page
Loading...
