NEC Univerge SV8300 - [Cm5 B] Ip Address for Ip Trunk;Sip Trunk Point-To-Multipoint Connection

3-433 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
IP ADDRESS FOR IP TRUNK/SIP TRUNK POINT-TO-MULTIPOINT
CONNECTION
5B
FUNCTION:
This command is used to assign the destination IP Address for the IP trunk/SIP trunk Point-to-Multipoint
connection.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE++ +
+
5BYY
2ND DATA
DE
1ST DATA
(5 digits) (12 digits)
++
DE
: Default
NOTE 1: Set this command only for Point-to-Multipoint connection (when CMA7 Y=46 is set to “0”).
NOTE 2: Destination IP Address of opposite IP trunk (P2P CCIS) is the IP Address of opposite
SV8300 assigned by CM0B Y=0XX/1XX>00 or the IP Address of opposite 2400 IPX.
Continued on next page
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
01 Destination IP Address
for IP trunk/SIP trunk
XXX ZZ XXX: 000-255
(IP Address Pattern No.)
ZZ: IP Address No. 00-07
NOTE 1
0000000
00001
2552552
55254
NONE
Destination IP Address of
opposite IP trunk/opposite
IPT (P2P CCIS)/opposite
SIP trunk NOTE 2
No data
~
APRIL/16/2010
CM5B