NEC Univerge SV8300 - [Cmbc] Presence Service, Sip Converter, Greeting Process of; Sp350

3-639 NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE
TITLE:
PRESENCE SERVICE, SIP CONVERTER, GREETING PROCESS OF
SP350
BC
FUNCTION:
This command is used to assign the data to control Presence Service, SIP Converter or greeting process
of SP350.
[8300R3.5]
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
+ BCYY
EXE++
+
2ND DATA
DE
1ST DATA
(3/4 digits) (1-15 digits)
++
DE
: Default
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
03 IP address for Pres-
ence Server
[8300R4]
001 Fixed value XXX.X
X...X
NONE
IP address for Pres-
ence Server (Maxi-
mum 15 digits)
XXX.XXX.XXX.XX
X=0.0.0.1-
255.255.255.254
No data
NOTE: When Presence Service of SP350 is executed, reset the system after setting this data.
05 Whether the authenti-
cation for each call is
allowed
1XX SIP Converter
Group ID
XX: 01 (Unit No.)
[8300R6
software
or before]
: 01-50
(Unit No.)
[8300R7
software
or later]
0
1
Restricted
Allowed
CM1D Y=32
NOTE 1: For normal operation, be sure to set the second data to “1” (Allowed) to restrict the unauthorized
connection.
NOTE 2: The authentication for each call is not provided when the digest authentication is restricted by
CM1D Y=32.
Continued on next page
RESET
JANUARY/31/2012
CMBC