NEC Univerge SV8300 - [Cm41] System Timer Data

3-334 NWA-033623-001 Rev.8.1
91ch3004.fm
COMMAND CODE
TITLE:
SYSTEM TIMER DATA
41
FUNCTION:
This command is used to assign the System Timer data.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
Y=0
+ 41Y + + + + +
1ST DATA
EXE
ST
DEDE
2ND DATA
(2 digits) (2 digits)
Y
1ST
DATA
MEANING DEFAULT
2ND DATA
INCREMENT
UNIT
TIMER
0 00 Attendant Recall for
Ring Transfer, Camp-
On, and unanswered
call
[8300R2]
NONE 01 02 03 04 05 06 .......................13 14
2.4 seconds
31.2
33.6
seconds
0 2.4 4.8 7.2 9.6 12.0 .................... 28.8 31.2
2.4 4.8 7.2 9.6 12.0 14.4.................... 31.2 33.6
15 16 17 18 19.........................................24
9.6 seconds
28.8 38.4 48.0 57.6 67.2..................................... 115.2
38.4 48.0 57.6 67.2 76.8..................................... 124.8
01 Elapsed time before
Call Forwarding-No
Answer for trunk
incoming call/Auto-
matic Change of Night
Service (Attendant
Overflow)/Group
Diversion/Direct-In
Termination
NONE 01 02 03 04 05 06 .......................29 30
4 seconds
32
36
seconds
0 4 8 12 16 20 ...................... 112 116
4 8 12 16 20 24 ......................116 120
NOTE: For the timer of the second call forwarding,
see CM41 Y=0>46.
02 Path on delay/single-
line toll restrict defeat
guard timer
NONE 01 02 03 .........................................................14
80 ms.
1040 ms. 80 160 240 ......................................................1120
Continued on next page
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
NOVEMBER/12/2008
CM41