NEC Univerge SV8300 - [Cm64] Automated Attendant, Tenant Number for Music on Hold, Number of Queue Limit, Trunk Access Code for Mobility Access Mode, Isdn Alternating Routing

3-444 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
AUTOMATED ATTENDANT, TENANT NUMBER FOR MUSIC ON HOLD, NUMBER
OF QUEUE LIMIT, TRUNK ACCESS CODE FOR MOBILITY ACCESS MODE, ISDN
ALTERNATING ROUTING
64
FUNCTION:
This command is used to define the answering system of the Automated Attendant feature and assign
the Tenant Number for Music on Hold, the Number of Queue Limit, the Trunk access code for Mobility
Access mode and the ISDN Alternating Routing.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
NOTE: If no tone connection is required, Dial Tone sending can be stopped by CM48 Y=2.
Continued on next page
ST
EXE++ ++
64Y/YY
DATA
DE
TENANT NUMBER
(2 digits) (1-26 digits)
++
DE
: Default
Y
TENANT
SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
0 Answering System for
Day Mode
00-63 00
01
02
03
DT connection
Hold Tone on CPU blade +
DT connection
1st Answering Message +
DT connection
DT connection
CM30 Y=02, 03
CM48 Y=2>06
CM41 Y=0>33, 43
CM49
CM63 Y=2
JULY/17/2009
CM64