NEC Univerge SV8300 - Page 501

3-445 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
AUTOMATED ATTENDANT, TENANT NUMBER FOR MUSIC ON HOLD, NUMBER
OF QUEUE LIMIT, TRUNK ACCESS CODE FOR MOBILITY ACCESS MODE, ISDN
ALTERNATING ROUTING
64
: Default
Y
TENANT
SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
1 Tenant Number for Music
on Hold
00-63 00
09
10
11
NONE
External Hold Tone Source
No. by PGD(2)-U10 ADP
[8300R3]
Hold Tone Source on CPU
blade
External Hold Tone Source
through Pin JACK on the
CPU blade
Hold Tone Source on CPU
blade
CM48 Y=0
NOTE: This data is effective only when the second data of CM48 Y=0 is set to “1300”.
2 Answering System for
Night Mode
00-63 00
01
02
03
DT connection
Hold Tone Source on CPU
blade + DT connection
Night Message + DT
connection
As per CM64 Y=0
CM30 Y=02, 03
CM41 Y=0>33, 43
CM49 Y=00: 02XX,
Y=02
CM64 Y=0
NOTE: When providing a Night Message for Automated Attendant, the second data “08” of CM30 Y=30, 31
cannot be specified for handling of busy/not available Automated Attendant destination.
3 Number of Queue Limit
for TAS, Day Mode
00-63 01
99
NONE
1 line
99 lines
No limit
CM51 Y=26, 30
CM76 Y=16
4 Number of Queue Limit
for TAS, Night Mode
CM51 Y=27, 30
CM76 Y=16
5 Number of Queue Limit
for TAS, Mode A
CM51 Y=28, 30
CM76 Y=16
6 Number of Queue Limit
for TAS, Mode B
CM51 Y=29, 30
CM76 Y=16
10 Trunk access code 1 for
Call Forwarding in
Mobility Access mode
X-XXXX
NONE
Trunk Access Code
(1-4 digits)
X: 0-9, A (*), B (#)
No data
CM12 Y=80
CM15 Y=216
CM20 Y=0-3: A256
CM76 Y=41
Continued on next page
~
~
~
JUNE/15/2011
CM64