EasyManua.ls Logo

NEC Univerge SV8300 - Page 502

NEC Univerge SV8300
804 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-446 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
AUTOMATED ATTENDANT, TENANT NUMBER FOR MUSIC ON HOLD, NUMBER
OF QUEUE LIMIT, TRUNK ACCESS CODE FOR MOBILITY ACCESS MODE, ISDN
ALTERNATING ROUTING
64
: Default
Y
TENANT
SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
11 Trunk access code for
ISDN Alternative Rout-
ing in Remote Unit sur-
vival mode
00-63 X-XXXX
NONE
Trunk Access Code
(1-4 digits)
X: 0-9, A (*), B (#)
ISDN Alternative Routing
disabled
12 Method of ISDN Alterna-
tive Routing in Remote
Unit survival mode
0
1
2
3
Destination station number
of each station
Destination station number
of each tenant
Destination station number
of each tenant + Subaddress
ISDN Alternative Routing
disabled
CME6 Y=51
NOTE: When the second data is set to “0” and CME6 Y=51 is set to “NONE”, this command operates as well
as second data is set to “1”.
13 Destination of ISDN
Alternative Routing in
Remote Unit survival
mode (tenant basis)
00-63 X
XX...XX
NONE
Destination C.O. line num-
ber (Maximum 26 digits)
No data
CM64 Y=12
NOTE: When second data of CM64 Y=12 is set to “1/2”, the destination is set by this command.
14 Trunk access code 2 for
Call Forwarding in
Mobility Access mode
[8300R6]
00-63 X-XXXX
NONE
Trunk Access Code
(1-4 digits)
X: 0-9, A (*), B (#)
No data
CM12 Y=80
CM15 Y=216
CM20 Y=0-3: A267
CM76 Y=41
15 Trunk access code 3 for
Call Forwarding in
Mobility Access mode
[8300R6]
CM12 Y=80
CM15 Y=216
CM20 Y=0-3: A268
CM76 Y=41
16 Trunk access code 4 for
Call Forwarding in
Mobility Access mode
[8300R6]
CM12 Y=80
CM15 Y=216
CM20 Y=0-3: A269
CM76 Y=41
~
JUNE/15/2011
CM64

Table of Contents

Other manuals for NEC Univerge SV8300

Related product manuals