NEC Univerge SV8300 - [Cm04] Setting of System Services

3-10 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
SETTING OF SYSTEM SERVICES
04
FUNCTION:
This command is used to assign the setting of System Services, the setting of Language Indicated Num-
ber, the 32-Party Conference with Password Protection, the Service Activation Dial for mobile phone in
Mobility Access, the A-law/µ-law setting for each Unit, the SMDR data output and the System Infor-
mation for Maintenance Report of PCPro.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST
EXE
++ +
+
04YY
2ND DATA
DE
1ST DATA
(1/2 digits) (1-64 digits)
++
DE
JUNE/15/2011
CM04