NEC Univerge SV8300 - [Cmf6] Online Mp-Fp Command Output

3-699 NWA-033623-001 Rev.8.1
91ch3008.fm
COMMAND CODE
TITLE:
ONLINE MP-FP COMMAND OUTPUT
F6
FUNCTION:
This command is used only for maintenance.
DO NOT USE this command without the assistance of a NEC engineer.
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST EXE++ ++F6Y
2ND DATA
DE
1ST DATA
(2 digits) (1-8 digits)
++ DE
: Default
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
2 MP-FP command out-
put setting
00 Command Code 00
FE
NONE
Command code to be output
Output all command codes
01 Unit Number 000
049
NONE
Unit number to be output
(When unit number ‘01’ is
specified, ‘000’ is selected.)
Output all Unit numbers
02 Slot number XXX
NONE
Slot number to be output
(When slot number ‘01’ is
specified, ‘000’ is selected.)
000-017: TDM terminal
024-026: SIP trunk
032-047: IPT (P2P CCIS)
128-191: IP Station
Output all Slot numbers
03 IN/OUT command setting 0
1
2
3
CCC
Display both IN command/
OUT command
Display only OUT command
Display only IN command
Not displayed
Clear all the data of CMF6
Y=2
~
~
JULY/17/2009
CMF6