Chapter 1 HOW TO USE CAT
1-3 NWA-033623-001 Rev.8.1
91ch1001.fm
CAT KEY FUNCTIONS
CAT KEY FUNCTIONS
In the CAT mode, each key on the Multiline Terminal is automatically assigned as shown in figure below.
For the function of each key, see “CAT Function Keys”. Page 1-15
CAT key assignment is different between 8300R2 software or before and 8300R3 software or later. Set
CM08>911 to 0 when CAT key assignment of 8300R2 software or before is used.
• CM08>911 (Layout the key on CAT mode) [8300R3]
2nd data: 0 (Old layout [8300R2 or before])
: 1 (New layout [8300R3 or later])
NOTE: Only New layout can be used regardless of this command when using DT330 DESI-less or
DT730 DESI-less, DT710 DESI-less, DT750.
JUNE/15/2011
To Next Page
Loading...
