NEC Univerge SV8300 - [Cmb4] Peg Count of Ip Network

3-609 NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE
TITLE:
PEG COUNT OF IP NETWORK
B4
FUNCTION:
This command allows accumulated traffic data for Bandwidth Control between location groups on IP
network to be read from the system PEG counter. Data can be cleared after reading.
PRECAUTION:
When the system is reset, the contents in the memories of the PEG counter are all cleared.
ASSIGNMENT PROCEDURE:
• To display
• To clear individual data
• To clear all data
LOCATION NUMBER (00-63)
+
ST
++
B4YY
+
DE
+
LOCATION NUMBER (00-63)
DE
LOCATION NUMBER (00-63)
+
ST
++
B4YY
+
DE
+
LOCATION NUMBER (00-63)
DE
EXE
+
CCC
+
ST
EXE
++ ++
B4YY CCC
DE
++
DE
9999
JUNE/15/2011
CMB4