3-646 NWA-033623-001 Rev.8.1
91ch3008.fm
COMMAND CODE
TITLE:
RESET/INSTANT SYSTEM CHANGEOVER
E0
FUNCTION:
This command allows the maintenance personnel to execute the System Reset, Blade Reset and IPT
(P2P CCIS) Reset, Instant System Changeover with the PCPro/CAT.
PRECAUTION:
If the setting data (Month, Day and Time) is different from the current time of the system clock set by
CM02, any request to reset the system is not accepted and “DATA ERROR” is displayed.
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST EXE++ ++E0Y
DATA
DE
TYPE OF RESET
(2/4 digits) (4/8 digits)
++ DE
Y TYPE OF RESET SETTING DATA
RELATED
COMMAND
No. MEANING No. MEANING DATA MEANING
2 System Reset 2000 CPU Reset MM
DD
HH
mm
Current time dis-
played on Multiline
Terminal/DESKCON
NOTE 1
To request the reset
immediately.
CM02
3 Blade Reset XXZZ XX: Unit No. (01-50)
ZZ : Slot No. (01-18)
XXZZ XX: Unit No. (01-50)
ZZ : Slot No. (01-18)
NOTE 2
NOTE 3
NOTE 4
5 IPT (P2P CCIS) Reset
NOTE 5
NOTE 6
NOTE 7
NOTE 8
00 Reset after the IPT
(P2P CCIS) installa-
tion
MM
DD
HH
mm
Current time dis-
played on Multiline
Terminal/DESKCON
NOTE 1
To request the reset
immediately.
CM02
01 Reset while the sys-
tem is operating
CM02
CMA7 Y=44,
46, 50
Continued on next page
JANUARY/14/2011
CME0
To Next Page
Loading...
