: Default
NOTE 1: OAI Function key number is assigned by CM90.
NOTE 2: The digit code is assigned by CMD7 Y=6.
NOTE 3: The maximum number of operation codes is 16.
NOTE 4: Digit number is assigned by CMD7 Y=0.
NOTE 5: Do not use * as a digit code.
NOTE 6: The maximum number of operation codes is 128.
NOTE 7: Setting data for CMD7 Y=A>01 is effective only when CMD7 Y=A>00: 1.
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
A AP database of FLF 00 Recognition of AP database by
RR message
0
1
To provide
Not provided
01 Omission of AP database for
information added to RR mes-
sage NOTE 7
0
1
Not omitted
To omit
Chime from Multiline
Terminal at the time ter-
minal mode is released
0B Chime sending out at the time
(MRFR, MRFI) terminal mode
release
0
1
No ring
Ring
Chime from Multiline
Terminal when MSF is
canceled
11 When Terminal Mode is can-
celed
0
1
Ring
No ring
To Next Page
Loading...
