NEC Univerge SV8300 - [Cm0 C] Updating of Ip Station Firmware;Remote System Upgrade

3-128 NWA-033623-001 Rev.8.1
91ch3001.fm
COMMAND CODE
TITLE:
UPDATING OF IP STATION FIRMWARE/REMOTE SYSTEM
UPGRADE
0C
FUNCTION:
This command is used to specify the update information of IP Station firmware and Remote System Up-
grade.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
+0CYY+ + + + +
2ND DATA
EXE
ST
DEDE
(1-12 digits)
1ST DATA
(1-8 digits)
: Default
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
00
07
Update information
Profile No.
00 Type of firmware
for update
00
02
03
05
12
13
14
NONE
D
term
75 (Series E) (IP adapter type)
D
term
IP INASET
D
term
85 (Series i) (IP adapter type)
D
term
85 (Series i) (IP bundles type)
DT700 Series (DT710)
DT700 Series (DT730/
DT730 [DESI-less]/
DT710 [DESI-less])
DT700 Series (DT750)
No data
Continued on next page
~
JUNE/15/2011
CM0C