3-530 NWA-033623-001 Rev.8.1
91ch3006.fm
COMMAND CODE
TITLE:
MULTILINE TERMINAL/DESKCON/ADD-ON MODULE KEY
ASSIGNMENT
90
FUNCTION:
This command is used to assign functions to programmable keys on a Multiline Terminal, DESKCON
or Add-on Module.
PRECAUTION:
(1) “My Line” must always be assigned to any key except key No. 00 on each Multiline Terminal or
Add-on Module.
But DT300 Series Multiline Cordless Terminal (24BT) must be assigned “My Line” to key No. 00.
(2) For assignment of a key on the Add-on Module, CM98 data should be assigned before data
assignment of CM90.
(3) Twenty-five keys on the Add-on Module can be assigned as station/trunk appearances.
(4) For key number layout of each Multiline Terminal, DESKCON, DSS Console, and Add-On
Module, refer to “TERMINAL KEY ASSIGNMENT”. Page A-1
(5) When Multiline terminal key assignment is changed, existing key assignment must be deleted
before changing the data.
JANUARY/14/2011
CM90
To Next Page
Loading...
