NEC Univerge SV8300 - [Cm49] Voice Response System

3-397 NWA-033623-001 Rev.8.1
91ch3004.fm
COMMAND CODE
TITLE:
VOICE RESPONSE SYSTEM
49
FUNCTION:
This command is used to define the function of each Voice Response System (VRS) accommodated into
the system.
PRECAUTION:
When 8300R7 software or later is used and CF memory is used for Voice Response System, VRS num-
ber 000-015 can be used. When SRAM is used for Voice Response System, VRS number 000-007 can
be used as is the case in 8300R6 software or before.
ASSIGNMENT PROCEDURE:
DATA TABLE:
+ 49YY + + + + +
VRS
DATA
NUMBER
EXE
ST DEDE
TENANT
NUMBER
(2 digits)
(3 digits)
(2-5 digits)
Y
VRS No./
TENANT No.
SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00 Function of Voice
Response System
XXX: VRS number
(000-007)
[8300R6
software or
before]
: VRS number
(000-015)
[8300R7
software or
later]
01 XX 1st Answering Message of
Automated Attendant
XX: Message No. (00-63)
CM08
CM64
CM30 Y=30, 31
02 XX 2nd Answering Message/
Night Message of Auto-
mated Attendant
XX: Message No. (00-63)
03000 Night Announcement Service CM30 Y=02-05
04 X Z X: Announcement Service
Group (0-4)
Z: Announcement Service
Message No. (0-9)
CM15 Y=034-039
CM35 Y=069-073
05 XX Message on Hold Service
Transfer Trunk Line
XX: Message No. (00-63)
CM48 Y=0
06 XX Transferred Trunk Line
Message Service
(No Answer)
XX: Message No. (00-63)
CM65 Y=50
Continued on next page
JANUARY/31/2012
CM49