NEC Univerge SV8300 - [Cm43] Periodic Maintenance;Ip Station Firmware Automatic Update;System Data Copy;Automatic Clock Change

3-381 NWA-033623-001 Rev.8.1
91ch3004.fm
COMMAND CODE
TITLE:
PERIODIC MAINTENANCE/IP STATION FIRMWARE AUTOMATIC
UPDATE/SYSTEM DATA COPY/AUTOMATIC CLOCK CHANGE
43
FUNCTION:
This command is used to set the date, time and check item for periodic maintenance. The fault informa-
tion display reminds you of the time for each periodic maintenance.
[See CMEA Fault Information Display, fault kind No. 016 Page 3-678]
This command is also used to set the time for regular system data backup.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
+ 43Y + +
1ST DATA
++ +
2ND DATA
EXEST DEDE
(2 digits) (1/4/10 digits)
: Default
YMEANING
1ST
DATA
MEANING 2ND DATA MEANING
2 Date and time setting
for periodic mainte-
nance
00-07 Periodic maintenance 0-
7
YYYY MM DD HH
NONE
YYYY: Year (2011-2099)
MM : Month (01-12)
DD : Day (01-31)
HH : Hour (00-23)
No data
3 Check item for peri-
odic maintenance
0
1
7
NONE
Battery check
Check item No. 1
Check item No. 7
No data
5 Time setting for regu-
lar system data backup
00 Regular backup time HH MM
9999
NONE
HH : Hour (00-23)
MM : Minute (00-59)
No backup the system data
0300 (3:00 a.m.)
Continued on next page
~
~
JANUARY/14/2011
CM43