NEC Univerge SV8300 - [Cm36] Restriction Data;Pad Data for Tandem Connection

3-326 NWA-033623-001 Rev.8.1
91ch3003.fm
COMMAND CODE
TITLE:
RESTRICTION DATA/PAD DATA FOR TANDEM CONNECTION
36
FUNCTION:
This command is used to assign restriction data and PAD data for tandem connection within a system,
for each combination of an incoming trunk route and an outgoing trunk route.
PRECAUTION:
(1) Any incoming trunk route assigned to “No release signal” in CM35 Y=005, is restricted from
tandem connection.
ASSIGNMENT PROCEDURE:
ST
EXE
++ ++
36Y
DATA
DE
INCOMING
TRUNK
(1-4 digits)
++
DE
ROUTE
(2 digits)
OUTGOING
TRUNK
ROUTE
(2 digits)
+
JULY/17/2009
CM36