3-226 NWA-033623-001 Rev.8.1
91ch3002.fm
COMMAND CODE
TITLE:
PS-ID ASSIGNMENT, PS/STANDARD SIP STATION OPERATION
DATA DOWNLOAD
1D
FUNCTION:
This command is used to assign the PS-ID, to download the PS/Standard SIP station operation data.
PRECAUTION:
(1) When a PS is set up initially, set the PS in Data Download Mode by applying power to the PS while
pressing the SEND key, and then execute the CM1D Y=20 in Calling Area No. 00.
(2) It takes 10 seconds to load the PS operation data to the PS.
(3) The following items display on the PCPro.
STATUS DISPLAY
Loading succeeded OK
PS is busy WAIT BUSY NOW
PS is out of area WD ERROR
Lack of PS data DATA ERROR
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE
++ ++
1DYY
SETTING DATA
DE
PS/STANDARD
(1-9 digits)
++
DE
SIP STATION No.
(1-8 digits)
: Default
Y PS/STANDARD
SIP STATION
No.
SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
01 Subline PS number to each
Primary PS station
X-XXXXXXXX
(Primary PS
Station No.)
X-
XXXXXXXX
NONE
Subline PS Station No.
X: 0-9, A (*), B (#)
No data
CM10 Y=04
14 Individual station type of
Standard SIP station
[8300R4]
X-XXXXXXXX
(Standard SIP
station No.)
0
1
PS (Less than 12 digits)
Roaming PS
(Less than 5 digits)
CM10 Y=04
NOTE: Set the second data to “0” when Standard SIP station is accommodated.
Continued on next page
JANUARY/31/2012
CM1D
To Next Page
Loading...
