: Default
Y PS/STANDARD
SIP STATION
No.
SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
15 Terminal type of PS
[For PCS]/
Terminal type of Standard
SIP station
[8300R4]
X-XXXXXXXX
(Primary/Subline
PS Station No.,
Standard SIP
station No.)
00
05
15
Multiline Terminal PS II
Type with PS software ver-
sion 7.02 or later
Standard SIP station
[8300R3.5]
Multiline Terminal PS II
Type with PS software ver-
sion under 7.02/Former
Multiline Terminal PS Type
CM10 Y=04
NOTE 1: Set this data also to Subline PS station number, if provided.
NOTE 2: The default data of CM1D Y=15 is “00” for North America.
NOTE 3: PS software version is represented by the lower 3 digits of the PS’s issue number which is written on
the label in the rear side of PS.
16 Primary/Subline X-XXXXXXXX
(Primary/Subline
PS Station No.)
0
1
Subline PS
Primary PS
CM10 Y=04
20 PS Operation Data Down-
load
[For PCS]
X-XXXXXXXX
(Primary PS
Station No.)
0
1
No data
Execute
CM10 Y=04
21 PS-ID
[For PCS]
XX...XX
NONE
PS-ID
(Maximum 9 digits, Deci-
mal)
No data
CM10 Y=04
22 PS Location Search with no
ringing
0
1
To provide when PS is idle
Not provided when PS is
idle
CM10 Y=04
NOTE: For Multiline Terminal PS II/Multiline Terminal PS III Type with PS, set the second data to 0. For the
other PSs, set the second data to “1”.
Continued on next page
To Next Page
Loading...
