NEC Univerge SV8300 - [Cm30] Trunk Data

3-259 NWA-033623-001 Rev.8.1
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK DATA
30
FUNCTION:
This command is used to assign characteristics to trunk lines and IPT (P2P CCIS) lines which have been
defined by CM10.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
DATA
+++ ++ +
ST
30YY
EXE
TRUNK
NUMBER
(000-511)
(1-8 digits)
DE DE
: Default
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00 Trunk route allocation 00
63
NONE
Trunk route number 00
Trunk route number 63
No data
CM35
CM10
01 Allocation of tenants to trunks 00
01
63
Tenant number 00
Tenant number 01
Tenant number 63
CM63 Y=0, 2
CM49
Y=01-07
CM51, CM65
Continued on next page
RESET
BLADE RESET
IPT (P2P CCIS) RESET
~
~
~
~
~
~
JUNE/15/2011
CM30