NEC Univerge SV8300 - [Cme8] Updating of Access Blade Firmware

3-658 NWA-033623-001 Rev.8.1
91ch3008.fm
COMMAND CODE
TITLE:
UPDATING OF ACCESS BLADE FIRMWARE
E8
FUNCTION:
This command is used to update the Access blade (Line/Trunk blades) firmware by PCPro/CAT opera-
tion.
NOTE: Refer to “PC Programming Manual” for the access blade firmware update.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST
EXE++ +
+
E8Y
2ND DATA
DE
1ST DATA
(4 digits) (1-6 digits)
++
DE
JULY/17/2009
CME8