NEC Univerge SV8300 - [Cm40] Function of Cpu Rs-232 C Port

3-328 NWA-033623-001 Rev.8.1
91ch3004.fm
COMMAND CODE
TITLE:
FUNCTION OF CPU RS-232C PORT
40
FUNCTION:
This command is used to assign the function of the RS-232C ports on the CPU blade.
The CPU blade has two RS-232C ports, which are used for the following purpose.
: To assign –: Not assigned ( ): Port Location Number
FUNCTION
RS-232C PORTS ON THE CPU BLADE
REMARKS
UNIT01 UNIT02 UNIT03 UNIT04
PORT
1
PORT
2
PORT
1
PORT
2
PORT
1
PORT
2
PORT
1
PORT
2
PCPro 
(0)

(1)
*

(0)
*

(1)
*

(0)
*

(1)
*

(0)
*

(1)
Available to use these ports
at the same time
(Maximum 2/system [Maxi-
mum 1/system when built-in
modem is connected])
Built-in PMS
[8300R3]

(0)

(1)

(4)

(5)

(6)

(7)
– – Not available to use these
ports at the same time
(Maximum 1/system)
MCI 
(0)

(1)

(4)

(5)

(6)

(7)
– – Not available to use these
ports at the same time
(Maximum 1/system)
External Printer for
PMS
Not available to use these
ports at the same time
(Maximum 1/system)
VoIP log collection 
(0)

(1)
––––––Not available to use these
ports at the same time
(Maximum 1/system)
MP-FP command
output
Not available to use these
ports at the same time
(Maximum 1/system)
Built-in SMDR Not available to use these
ports at the same time
(Max
imum 1/system)
Individual Station
Record by CIS
[8300R1 Only]
Not available to use these
ports at the same time
(Maximum 1/system)
Continued on next page
[8300R2]
APRIL/16/2010
CM40