NEC Univerge SV8300 - [Cmad] Zt;Sip Converter Calling Area;Pad Data Assignment

3-588 NWA-033623-001 Rev.8.1
91ch3007.fm
COMMAND CODE
TITLE:
ZT/SIP CONVERTER CALLING AREA/PAD DATA ASSIGNMENT
AD
FUNCTION:
This command is used to assign the calling area and PAD data for each ZT/SIP converter.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
ST
EXE
++ ++
ADYY
SETTING DATA
DE
ZT/SIP CONVERTER NUMBER
(3 digits) (2-5 digits)
++
DE
: Default
NOTE: Follow the default setting. When you change the data of CMAD Y=04/05/06, contact NEC.
Continued on next page
Y MEANING
ZT/SIP
CONVERTER
No.
SETTING DATA
DATA MEANING
00 Calling Area 000-127 XX Y ZZ
NONE
CCC
XX: Calling Area No. (00-31)
Y : Group No. (0-7)
ZZ : Group ZT No. (00-31)
No data
Data clear
04 Receiving sensibility of LCCH
from PS to ZT
[Latin America Only]
NOTE
01
02
15
40 dB (Faint)
20 dB (Average)
0 dB (Strong)
05 Sending Level of LCCH from ZT
to PS NOTE
01
02
15
•ZT [Latin America Only]
10 mW, –40 dB (Faint)
10 mW, –20 dB (Average)
10 mW, 0 dB (Strong)
06 Receiving sensibility of TCH
from PS to ZT
[Latin America Only]
NOTE
01
02
15
40 dB (Faint)
20 dB (Average)
0 dB (Strong)
JANUARY/31/2012
CMAD