Chapter 1 HOW TO USE CAT
1-28 NWA-033623-001 Rev.8.1
91ch1001.fm
ERROR MESSAGES
ERROR MESSAGES
When an operation is incorrect, or wrong data is entered, an error message is displayed on the LCD. Error
messages and their meanings are shown below.
Error Messages
ERROR MESSAGE MEANING OF MESSAGE ACTION
CM DIGIT ERROR [0]/
DIGIT ERROR [0]
NOTE
Error in the number of digits of the
command code entered.
Depress “ST” or “CE” and enter the
correct data.
FD DIGIT ERROR [0]/
DIGIT ERROR [0]
NOTE
Error in the number of digits of the
first data entered.
SD DIGIT ERROR [0]/
DIGIT ERROR [0]
NOTE
Error in the number of digits of the
second data entered.
FD DATA ERROR [0]/
DATA ERROR [0]
NOTE
The value of the first data entered is
incorrect.
SD DATA ERROR [0]/
DATA ERROR [0]
NOTE
The value of the second data entered
is incorrect.
CM CODE NOT
ALLOWED/CODE
NOT ALLOWED
NOTE
Command which is not allowed in
the current status (for example, the
message is displayed when executing
CM00 in online status).
Check whether the command is avail-
able or not.
FD CODE NOT
ALLOWED/CODE
NOT ALLOWED
NOTE
First data which is not allowed in the
current status.
Check whether the first data is avail-
able or not.
Continued on next page
To Next Page
Loading...
