NEC Univerge SV8300 - [Cm59] Tas;Acd;Ucd Relay Interruption Pattern

3-432 NWA-033623-001 Rev.8.1
91ch3005.fm
COMMAND CODE
TITLE:
TAS/ACD/UCD RELAY INTERRUPTION PATTERN
59
FUNCTION:
This command is used to assign the interruption pattern on the TAS and ACD/UCD indicators controlled
via External Relay Interface of CPU.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
DATA TABLE:
+59+ +
FUNCTION
++ +
NUMBER
DATA
(2 digits)
EXE
ST
DEDE
(2 digits)
: Default
FUNCTION NUMBER PURPOSE DATA MEANING
00 TAS/ACD/UCD Relay
Interruption Pattern
01 30 IPM
02 60 IPM
03 120 IPM
07 Steady on
NONE 120 IPM
JULY/18/2008
CM59